OLICNC Talking about The highest machining accuracy that can be achieved by turning, milling, planing, grinding, drilling and boring

Turning

The workpiece rotates, and the turning tool moves in a straight line or a curve in the plane. Turning is generally carried out on a lathe to process the inner and outer cylindrical surfaces, end surfaces, conical surfaces, forming surfaces and threads of the workpiece.

The turning accuracy is generally IT8-IT7, and the surface roughness is 1.6-0.8μm.

1) Rough turning strives to use a large depth of cut and large feed to improve the turning efficiency without reducing the cutting speed, but the machining accuracy can only reach IT11, and the surface roughness is Rα20-10μm.

2) Semi-finishing and finishing should use high-speed and small feed and cutting depth as much as possible, the machining accuracy can reach IT10-IT7, and the surface roughness is Rα10-0.16μm.

3) High-speed precision turning of non-ferrous metal parts with finely researched diamond turning tools on a high-precision lathe can make the machining accuracy reach IT7-IT5, and the surface roughness is Rα0.04-0.01μm. This kind of turning is called “mirror turning”. ”

Milling

Milling is a highly efficient machining method in which a rotating multi-blade tool is used to cut a workpiece. It is suitable for processing planes, grooves, various forming surfaces (such as splines, gears and threads) and special shapes of molds. According to the same or opposite direction of the main movement speed and workpiece feed direction during milling, it is divided into down milling and up milling.

The machining accuracy of milling can generally reach IT8~IT7, and the surface roughness is 6.3~1.6μm.

1) The machining accuracy during rough milling is IT11~IT13, and the surface roughness is 5~20μm.

2) The machining accuracy of semi-finish milling is IT8~IT11, and the surface roughness is 2.5~10μm.

3) The machining accuracy of fine milling is IT16~IT8, and the surface roughness is 0.63~5μm

Planing

Planing is a cutting method in which a planer is used to make a horizontal relative linear reciprocating motion on the workpiece, which is mainly used for the shape processing of parts.

The planing processing accuracy can generally reach IT9~IT7, and the surface roughness is Ra6.3~1.6μm.

1) The rough planing accuracy can reach IT12~IT11, and the surface roughness is 25~12.5μm.

2) The semi-finishing machining accuracy can reach IT10~IT9, and the surface roughness is 6.2~3.2μm.

3) The finishing precision can reach IT8~IT7, and the surface roughness is 3.2~1.6μm

Grinding

Grinding refers to the processing method of using abrasives and abrasive tools to remove excess material on the workpiece. It belongs to finishing and is widely used in the machinery manufacturing industry.

Grinding is usually used for semi-finishing and finishing, and the accuracy can reach IT8~IT5 or even higher, and the surface roughness is generally 1.25~0.16μm.

1) The surface roughness of precision grinding is 0.16~0.04μm.

2) The surface roughness of ultra-precision grinding is 0.04~0.01μm.

3) The surface roughness of mirror grinding can reach below 0.01μm.

Drilling

Drilling is a basic method of hole making. Drilling is often carried out on drilling machines and lathes, and can also be carried out on boring machines or milling machines.

The machining accuracy of drilling is low, generally only reaching IT10, and the surface roughness is generally 12.5~6.3 μm. After drilling, reaming and reaming are often used for semi-finishing and finishing.

Boring

Boring is an inner diameter cutting process in which a tool is used to enlarge a hole or other circular profile, and its applications generally range from semi-roughing to finishing. The tool used is usually a single-edged boring tool (called a boring bar).

1) The boring accuracy of steel materials can generally reach IT9~IT7, and the surface roughness is 2.5~0.16μm.

2) The machining accuracy of precision boring can reach IT7~IT6, and the surface roughness is 0.63~0.08μm