促销中

ER collets spring collet DIN6499B ER8 11 16 20 25 32 40 50 collet for milling machine

$5.13$9.03

ER collets spring

Brand: OLICNC

Material:65Mn

Hardness:HRC44-48

Run Out:Ⅰ:≤0.003m   Ⅱ:≤0.005mm   Ⅲ:≤0.008mm    Ⅳ:≤0.01mm    Ⅴ:≤0.015mm

Compare
SKU: OL20220207 分类: , 标签: , , , , , ,

1.ER Collets are applied for a variety of processing,including drilling, milling,tapping&grinding.
2.material: 65Mn er collets. standard: DIN6499B
3.hardness:HRC 44-48. 4. full size: ER8,ER11,ER16,ER20,ER25,ER32,ER40,ER50.

Features:

Widely used in boring, milling, drilling, tapping, CNC, sculpture and other processing operations, also can be supported used with the holder of CNC tool.
Big clamping force, wide clamping range, high accuracy.
The correct methods of mounting the collet nut:
1. Put the chuck into the pressure cap, gently turn the clamp spring, when eccentric portion of the pressure cap recessed clamp spring groove. Along the arrow
direction and use equal force to push clamp spring, can mount pressure cap.
2. Put the clamp spring and cap all together installed on the chuck body or spindle. Insert into the clamping hole after wipe the cylindrical shank, use a wrench to
tighten the pressure cap, until clip firmly the tool before use.
(Note : Avoid fastening pressure cap that not installed tool, to avoid damage the clamp spring)
3. Use a wrench to loosen the pressure cap and took out the chuck or tool, remove the tool. Along the direction of the arrow push out the clamp spring. Then according
to need replace other clamp spring.

er collets

ER8, ER11, ER16, ER20, ER25, ER32, ER40

评价

目前还没有评价

成为第一个“ER collets spring collet DIN6499B ER8 11 16 20 25 32 40 50 collet for milling machine” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注